Layering another type of paint on cabinet/how to fix


I am redoing a cabinet for an entertainment center. I sanded, 2 coats primer (1-2-3) and 2 coats paint. I am using BM advance untinted satin finish. The cabinets are pictured below. The issue is that I got great coverage on the flat parts of the doors with a foam roller. But on the smaller detailed parts I had to use a brush and the coverage is no bueno. I haven’t been thrilled at all with the BM advance to be honest. It’s been about 6 days since the last coat of BM. I’m wondering if I should sand w/220 or 400 and add one more coat of paint to the door fronts, and if so what paint should I use. Is there another BM paint that would provide better coverage? Since this cabinet is not in my kitchen or bath I don’t need crazy durability. I also don’t want to mess with the cure or hardening of what’s on there now. I’m not going for perfection but not sure how to meet my fairly low standards. The cabinet housing looks good because it’s all flat parts that were rolled. Help!

Older Post Newer Post